 |
Devolux
Dermax mainly products: Poly-L-Lactic Acid Plla Injection Filler
Poly l lactic acid (PLLA) filler is a synthetic, biodegradable, and biocompatible polymer used in aesthetic medicine for facial volume restoration and skin rejuvenation. Unlike traditional dermal fillers that provide immediate results by physically filling in wrinkles and folds, PLLA works as a bio-stimulatory agent. It stimulates the body's own collagen production over time, leading to gradual and natural-looking improvements in skin texture and volume.
PLLA fillers are commonly used to treat areas such as the nasolabial folds, cheeks, and temples. The treatment involves a series of injections, and the results typically become noticeable after a few months as new collagen forms. The effects can last up to two years or more, depending on individual factors and the specific product used.
One of the well-known brands of PLLA filler is Devolux, which has been extensively studied and shown to be effective and safe for long-term use. However, like any medical treatment, poly l lactic acid filler can have side effects, including temporary swelling, redness, and the formation of small nodules under the skin, which usually resolve on their own.
Devolux is poly-L-lactic acid(PLLA) filler designed with GranCross Technology for collagen production. Devolux can naturally, gradually, effectively rejuve nate the skin with long lasting results.
Instructions:
| Name | PLLA (Poly-l-lactic acid) Filler |
| Specification | 160mg/Vial |
| Injection layer | Between subdermal and superficial fat |
| Session | 3 times treatment is a session. The second treatment is 1-1.5 months after the first treatment. The third treatment is 1.5-2 months after the second treatment. |
| Duration | A session lasts for 2-3 years |
| Expiry time | 2 years |
| Storage | Room temperature storage |
1.Safe
Devolux uses SFE-Rice type microsphere technology, creating smaller, evenly distributed particles (3-5μm) with lower solvent residue, reducing clumping risk.
2.Quality
Uniform microspheres ensure better ingredient distribution, higher stability, and prevent needle blockage.
 Irregular microspheres Diameter: 50 to 100μm |  Round microspheres Diameter: 10-80μm Need to use emulsifier and dispersant to prepare particles |  The golf icrospheres Diameter: 3-5μm The preparation process requires an aqueous phase |  Rice type microspheres Diameter: 3-5μm Preparation process "0" water phase, "0" emulsifier and "0" dispersant. Higher security. |
3.Fast effect
Devolux PLLA delivers quicker results compared to other fillers.
4.Fast Dissolving
Dissolves in just 5 minutes, minimizing waste and allowing immediate use.
Effects last 2-3 years with gradual degradation in the body.
Stimulates natural collagen regeneration for a more authentic look.
7.Comparison
Brand | Other Brand | DevoluxTM |
Structure | Irregular particles | Rice type microspheres |
Technique | Unkown | SFE |
Total weight per vial | 367.5mg | 287mg |
PLLA weight per vial | 150mg | 160mg |
Particle size | 40-60um | 3-5um |
Mixing volume | 6 | 10 |
Mixing time | 48h | 5min |
Pain | Painful | Light pain |
If you want to buy plla fillers ,please contact us when you free!
Forehead
Volume: 5-8ml
Injection level: blunt needles, flatly, mainly subcutaneously, supplemented by periosteum.
Remarks: If the amount is too large, the water will flow down.
Temple
Volume: 2-3ml on one side
Injection level: blunt and sharp needles are used together. The levels are subcutaneous fat layer and temporal muscle layer.
Remarks: Withdraw the needle and press until the medicine is evenly dispersed, then use a blunt needle to spread PLLA at the subcutaneous fat evenly, and press evenly.
Cheekbone
Volume: 2ml on one side
Injection level: It is recommended to use blunt needles flatly in multiple layers, subcutaneous, fat layer, fascia layer, subfascial tissue and periosteum.
Tear through
Volume: 1ml on one side
Injection level: It is recommended to use sharp needles, for single point injection at subcutaneous and fat layer.
Stretch marks
Mixing ratio: Add 15ml sterile water and 2ml Lidocaine.
Volume: 20ml-30ml Injection level: At the obvious part of the fractured layer. The sharp needle is inserted vertically into the deep dermis.
Remarks: Do not inject at the fat layer.
1.Exported carton package,each in bubble bag with carton dividers.
2.Special package is available refering to your requirements.
Delivery Time: DHL: 4-7 days
Dermax,with a comprehensive product portfolio is a leading innovator of advanced aesthetic medical technologies.
The Company's technology enables physicians to provide excellent soluntions for a broad range of medical- aesthetic application including face and body reshaping, resurfacing skin, eliminating fine lines or wrinkles treating scars, or removing unwanted hair.we've built in the easy of use, versatility,intuitiveness and value that allow physicians to do what they do best. The company is always looking forward to developing new solutions,products and industry-leading services designed around the needs of our partner physicians. So that can deliver better results,faster and safer than ever before.
|
Q: What is the MOQ?
A: We welcome small quantity for testing. MOQ is only 1 package!
Q: Can I mix different models?
A: Sure!
Q: Can I add or delete items from my order if I change my mind?
A: Yes!
Q: Can I put my own logo (OEM)?
A: Yes!
Q: When you ship my order?
A: Normally 2 days after receiving your payment, but it can be negotiated based on order quantity. Hope you could understand!
Q: How can you guarantee the production quality?
A: We have 13-year experience. We have strictly quality control system in our production process. We have 4 times inspection for each finished product before package.
Q: Which areas are most effectively treated with PDO threads?
A:Face, neck, eyebrows, nasolabial folds, marionette lines, cheeks, jaw line and double chins, as well as body areas in thin patients.
Q: What to do if a thread becomes visible through the skin on the neck?
A:Neck skin is very delicate and highly translucent; the blue colour of the thread will not last and will dissolve in the skin after about two weeks. So one should wait.
Dermax mainly products: Poly-L-Lactic Acid Plla Injection Filler
Poly l lactic acid (PLLA) filler is a synthetic, biodegradable, and biocompatible polymer used in aesthetic medicine for facial volume restoration and skin rejuvenation. Unlike traditional dermal fillers that provide immediate results by physically filling in wrinkles and folds, PLLA works as a bio-stimulatory agent. It stimulates the body's own collagen production over time, leading to gradual and natural-looking improvements in skin texture and volume.
PLLA fillers are commonly used to treat areas such as the nasolabial folds, cheeks, and temples. The treatment involves a series of injections, and the results typically become noticeable after a few months as new collagen forms. The effects can last up to two years or more, depending on individual factors and the specific product used.
One of the well-known brands of PLLA filler is Devolux, which has been extensively studied and shown to be effective and safe for long-term use. However, like any medical treatment, poly l lactic acid filler can have side effects, including temporary swelling, redness, and the formation of small nodules under the skin, which usually resolve on their own.
Devolux is poly-L-lactic acid(PLLA) filler designed with GranCross Technology for collagen production. Devolux can naturally, gradually, effectively rejuve nate the skin with long lasting results.
Instructions:
| Name | PLLA (Poly-l-lactic acid) Filler |
| Specification | 160mg/Vial |
| Injection layer | Between subdermal and superficial fat |
| Session | 3 times treatment is a session. The second treatment is 1-1.5 months after the first treatment. The third treatment is 1.5-2 months after the second treatment. |
| Duration | A session lasts for 2-3 years |
| Expiry time | 2 years |
| Storage | Room temperature storage |
1.Safe
Devolux uses SFE-Rice type microsphere technology, creating smaller, evenly distributed particles (3-5μm) with lower solvent residue, reducing clumping risk.
2.Quality
Uniform microspheres ensure better ingredient distribution, higher stability, and prevent needle blockage.
Irregular microspheres Diameter: 50 to 100μm | Round microspheres Diameter: 10-80μm Need to use emulsifier and dispersant to prepare particles | The golf icrospheres Diameter: 3-5μm The preparation process requires an aqueous phase | Rice type microspheres Diameter: 3-5μm Preparation process "0" water phase, "0" emulsifier and "0" dispersant. Higher security. |
3.Fast effect
Devolux PLLA delivers quicker results compared to other fillers.
4.Fast Dissolving
Dissolves in just 5 minutes, minimizing waste and allowing immediate use.
Effects last 2-3 years with gradual degradation in the body.
Stimulates natural collagen regeneration for a more authentic look.
7.Comparison
Brand | Other Brand | DevoluxTM |
Structure | Irregular particles | Rice type microspheres |
Technique | Unkown | SFE |
Total weight per vial | 367.5mg | 287mg |
PLLA weight per vial | 150mg | 160mg |
Particle size | 40-60um | 3-5um |
Mixing volume | 6 | 10 |
Mixing time | 48h | 5min |
Pain | Painful | Light pain |
If you want to buy plla fillers ,please contact us when you free!
Forehead
Volume: 5-8ml
Injection level: blunt needles, flatly, mainly subcutaneously, supplemented by periosteum.
Remarks: If the amount is too large, the water will flow down.
Temple
Volume: 2-3ml on one side
Injection level: blunt and sharp needles are used together. The levels are subcutaneous fat layer and temporal muscle layer.
Remarks: Withdraw the needle and press until the medicine is evenly dispersed, then use a blunt needle to spread PLLA at the subcutaneous fat evenly, and press evenly.
Cheekbone
Volume: 2ml on one side
Injection level: It is recommended to use blunt needles flatly in multiple layers, subcutaneous, fat layer, fascia layer, subfascial tissue and periosteum.
Tear through
Volume: 1ml on one side
Injection level: It is recommended to use sharp needles, for single point injection at subcutaneous and fat layer.
Stretch marks
Mixing ratio: Add 15ml sterile water and 2ml Lidocaine.
Volume: 20ml-30ml Injection level: At the obvious part of the fractured layer. The sharp needle is inserted vertically into the deep dermis.
Remarks: Do not inject at the fat layer.
1.Exported carton package,each in bubble bag with carton dividers.
2.Special package is available refering to your requirements.
Delivery Time: DHL: 4-7 days
Dermax,with a comprehensive product portfolio is a leading innovator of advanced aesthetic medical technologies.
The Company's technology enables physicians to provide excellent soluntions for a broad range of medical- aesthetic application including face and body reshaping, resurfacing skin, eliminating fine lines or wrinkles treating scars, or removing unwanted hair.we've built in the easy of use, versatility,intuitiveness and value that allow physicians to do what they do best. The company is always looking forward to developing new solutions,products and industry-leading services designed around the needs of our partner physicians. So that can deliver better results,faster and safer than ever before.
|
Q: What is the MOQ?
A: We welcome small quantity for testing. MOQ is only 1 package!
Q: Can I mix different models?
A: Sure!
Q: Can I add or delete items from my order if I change my mind?
A: Yes!
Q: Can I put my own logo (OEM)?
A: Yes!
Q: When you ship my order?
A: Normally 2 days after receiving your payment, but it can be negotiated based on order quantity. Hope you could understand!
Q: How can you guarantee the production quality?
A: We have 13-year experience. We have strictly quality control system in our production process. We have 4 times inspection for each finished product before package.
Q: Which areas are most effectively treated with PDO threads?
A:Face, neck, eyebrows, nasolabial folds, marionette lines, cheeks, jaw line and double chins, as well as body areas in thin patients.
Q: What to do if a thread becomes visible through the skin on the neck?
A:Neck skin is very delicate and highly translucent; the blue colour of the thread will not last and will dissolve in the skin after about two weeks. So one should wait.
