 |
Devolux
Poly-L-Lactic Acid Plla Injection Filler
Dermax mainly products: Poly-L-Lactic Acid Plla Injection Filler
Instructions:
| Name | PLLA (Poly-l-lactic acid) Filler |
| Specification | 160mg/Vial |
| Injection layer | Between subdermal and superficial fat |
| Session | 3 times treatment is a session. The second treatment is 1-1.5 months after the first treatment. The third treatment is 1.5-2 months after the second treatment. |
| Duration | A session lasts for 2-3 years |
| Expiry time | 2 years |
| Storage | Room temperature storage |
Packing&Deliver
Packing Details sterile packaging and aluminum packing
Port Shijiazhuang
Lead Time:
| Quantity(Pieces) | 1 - 20 | 21 - 100 | >100 |
| Est. Time(days) | 3 | 7 | to be negotiated |
1.Safe
The chance of nodules by PLLA injection is much lower.
Greatly reduce the risk of treatment.
2.Quality
Rice-type microspheres have uniform particles with a diameter of 3-5μm.
The best ingredient distribution ratio, higher stability, not easy to settle, no needle blocking.
 Irregular microspheres Diameter: 50 to 100μm |  Round microspheres Diameter: 10-80μm Need to use emulsifier and dispersant to prepare particles |  The golf icrospheres Diameter: 3-5μm The preparation process requires an aqueous phase |  Rice type microspheres Diameter: 3-5μm Preparation process "0" water phase, "0" emulsifier and "0" dispersant. Higher security. |
3.Fast effect
7.Comparison
Brand | S c u l p t r a® | DevoluxTM |
Structure | Irregular particles | Rice type microspheres |
Technique | Unkown | SFE |
Total weight per vial | 367.5mg | 287mg |
PLLA weight per vial | 150mg | 160mg |
Particle size | 40-60um | 3-5um |
Mixing volume | 6 | 10 |
Mixing time | 48h | 5min |
Pain | Painful | Light pain |
Forehead
Volume: 5-8ml
Injection level: blunt needles, flatly, mainly subcutaneously, supplemented by periosteum.
Remarks: If the amount is too large, the water will flow down.
Temple
Volume: 2-3ml on one side
Injection level: blunt and sharp needles are used together. The levels are subcutaneous fat layer and temporal muscle layer.
Remarks: Withdraw the needle and press until the medicine is evenly dispersed, then use a blunt needle to spread PLLA at the subcutaneous fat evenly, and press evenly.
Cheekbone
Volume: 2ml on one side
Injection level: It is recommended to use blunt needles flatly in multiple layers, subcutaneous, fat layer, fascia layer, subfascial tissue and periosteum.
Tear through
Volume: 1ml on one side
Injection level: It is recommended to use sharp needles, for single point injection at subcutaneous and fat layer.
Stretch marks
Mixing ratio: Add 15ml sterile water and 2ml Lidocaine.
Volume: 20ml-30ml Injection level: At the obvious part of the fractured layer. The sharp needle is inserted vertically into the deep dermis.
Remarks: Do not inject at the fat layer.
1.Exported carton package,each in bubble bag with carton dividers.
2.Special package is available refering to your requirements.
Delivery Time: DHL: 4-7 days
Dermax,with a comprehensive product portfolio is a leading innovator of advanced aesthetic medical technologies.
The Company's technology enables physicians to provide excellent soluntions for a broad range of medical- aesthetic application including face and body reshaping, resurfacing skin, eliminating fine lines or wrinkles treating scars, or removing unwanted hair.we've built in the easy of use, versatility,intuitiveness and value that allow physicians to do what they do best. The company is always looking forward to developing new solutions,products and industry-leading services designed around the needs of our partner physicians. So that can deliver better results,faster and safer than ever before.
Before & After
|
Q: What is the MOQ?
A: We welcome small quantity for testing. MOQ is only 1 package!
Q: Can I mix different models?
A: Sure!
Q: Can I add or delete items from my order if I change my mind?
A: Yes!
Q: Can I put my own logo (OEM)?
A: Yes!
Q: When you ship my order?
A: Normally 2 days after receiving your payment, but it can be negotiated based on order quantity. Hope you could understand!
Q: How can you guarantee the production quality?
A: We have 13-year experience. We have strictly quality control system in our production process. We have 4 times inspection for each finished product before package.
Q: Which areas are most effectively treated with PDO threads?
A:Face, neck, eyebrows, nasolabial folds, marionette lines, cheeks, jaw line and double chins, as well as body areas in thin patients.
Q: What to do if a thread becomes visible through the skin on the neck?
A:Neck skin is very delicate and highly translucent; the blue colour of the thread will not last and will dissolve in the skin after about two weeks. So one should wait.
Dermax mainly products: Poly-L-Lactic Acid Plla Injection Filler
Instructions:
| Name | PLLA (Poly-l-lactic acid) Filler |
| Specification | 160mg/Vial |
| Injection layer | Between subdermal and superficial fat |
| Session | 3 times treatment is a session. The second treatment is 1-1.5 months after the first treatment. The third treatment is 1.5-2 months after the second treatment. |
| Duration | A session lasts for 2-3 years |
| Expiry time | 2 years |
| Storage | Room temperature storage |
Packing&Deliver
Packing Details sterile packaging and aluminum packing
Port Shijiazhuang
Lead Time:
| Quantity(Pieces) | 1 - 20 | 21 - 100 | >100 |
| Est. Time(days) | 3 | 7 | to be negotiated |
1.Safe
The chance of nodules by PLLA injection is much lower.
Greatly reduce the risk of treatment.
2.Quality
Rice-type microspheres have uniform particles with a diameter of 3-5μm.
The best ingredient distribution ratio, higher stability, not easy to settle, no needle blocking.
Irregular microspheres Diameter: 50 to 100μm | Round microspheres Diameter: 10-80μm Need to use emulsifier and dispersant to prepare particles | The golf icrospheres Diameter: 3-5μm The preparation process requires an aqueous phase | Rice type microspheres Diameter: 3-5μm Preparation process "0" water phase, "0" emulsifier and "0" dispersant. Higher security. |
3.Fast effect
7.Comparison
Brand | S c u l p t r a® | DevoluxTM |
Structure | Irregular particles | Rice type microspheres |
Technique | Unkown | SFE |
Total weight per vial | 367.5mg | 287mg |
PLLA weight per vial | 150mg | 160mg |
Particle size | 40-60um | 3-5um |
Mixing volume | 6 | 10 |
Mixing time | 48h | 5min |
Pain | Painful | Light pain |
Forehead
Volume: 5-8ml
Injection level: blunt needles, flatly, mainly subcutaneously, supplemented by periosteum.
Remarks: If the amount is too large, the water will flow down.
Temple
Volume: 2-3ml on one side
Injection level: blunt and sharp needles are used together. The levels are subcutaneous fat layer and temporal muscle layer.
Remarks: Withdraw the needle and press until the medicine is evenly dispersed, then use a blunt needle to spread PLLA at the subcutaneous fat evenly, and press evenly.
Cheekbone
Volume: 2ml on one side
Injection level: It is recommended to use blunt needles flatly in multiple layers, subcutaneous, fat layer, fascia layer, subfascial tissue and periosteum.
Tear through
Volume: 1ml on one side
Injection level: It is recommended to use sharp needles, for single point injection at subcutaneous and fat layer.
Stretch marks
Mixing ratio: Add 15ml sterile water and 2ml Lidocaine.
Volume: 20ml-30ml Injection level: At the obvious part of the fractured layer. The sharp needle is inserted vertically into the deep dermis.
Remarks: Do not inject at the fat layer.
1.Exported carton package,each in bubble bag with carton dividers.
2.Special package is available refering to your requirements.
Delivery Time: DHL: 4-7 days
Dermax,with a comprehensive product portfolio is a leading innovator of advanced aesthetic medical technologies.
The Company's technology enables physicians to provide excellent soluntions for a broad range of medical- aesthetic application including face and body reshaping, resurfacing skin, eliminating fine lines or wrinkles treating scars, or removing unwanted hair.we've built in the easy of use, versatility,intuitiveness and value that allow physicians to do what they do best. The company is always looking forward to developing new solutions,products and industry-leading services designed around the needs of our partner physicians. So that can deliver better results,faster and safer than ever before.
Before & After
|
Q: What is the MOQ?
A: We welcome small quantity for testing. MOQ is only 1 package!
Q: Can I mix different models?
A: Sure!
Q: Can I add or delete items from my order if I change my mind?
A: Yes!
Q: Can I put my own logo (OEM)?
A: Yes!
Q: When you ship my order?
A: Normally 2 days after receiving your payment, but it can be negotiated based on order quantity. Hope you could understand!
Q: How can you guarantee the production quality?
A: We have 13-year experience. We have strictly quality control system in our production process. We have 4 times inspection for each finished product before package.
Q: Which areas are most effectively treated with PDO threads?
A:Face, neck, eyebrows, nasolabial folds, marionette lines, cheeks, jaw line and double chins, as well as body areas in thin patients.
Q: What to do if a thread becomes visible through the skin on the neck?
A:Neck skin is very delicate and highly translucent; the blue colour of the thread will not last and will dissolve in the skin after about two weeks. So one should wait.
