 |
Devolux
Poly-L-Lactic Acid Plla Injection Filler
Injectable poly-l-lactic acid (Plla Injection Filler) is known commercially as Sculptra and Sculptra Aesthetic. The FDA has approved Sculptra since 2004 to treat lipoatrophy (thinning of the fat pads on the face) associated with the HIV virus. Sculptra Aesthetic received its FDA approval in 2009 for improving the appearance of nasolabial folds contour changes and other facial wrinkles.
As we age, the fat, muscles, bone, and skin in our face begins to thin. This loss of volume leads to either a sunken or sagging appearance of the face. Injectable poly-l-lactic acid is used to create structure, framework, and volume to the face. Plla Injection Filler is known as a bio-stimulatory dermal filler, this means it stimulates your own skin to produce new collagen. Over time your skin breaks down PLLA into water and carbon dioxide. The effects of Plla Injection Filler appear gradually over a few months, producing natural results.
Instructions:
| Name | Plla Injection Filler |
| Specification | 160mg/Vial |
| Injection layer | Between subdermal and superficial fat |
| Session | 3 times treatment is a session. The second treatment is 1-1.5 months after the first treatment. The third treatment is 1.5-2 months after the second treatment. |
| Duration | A session lasts for 2-3 years |
| Expiry time | 2 years |
| Storage | Room temperature storage |
| Quantity(Pieces) | 1 - 20 | 21 - 100 | >100 |
| Est. Time(days) | 3 | 7 | to be negotiated |
Topical numbing agents or anesthetic injections are sometimes applied to ease discomfort. Also, lidocaine is commonly added to Plla Injection Filler for improved patient comfort. Before and following treatment, ice may be given to ease discomfort and swelling. Patients are encourage to massage the treatment areas for the first 5 days, 5 times a day, for 5 minutes each. We call this the 5-5-5 rule.
Packing&Deliver
Packing Details sterile packaging and aluminum packing
Port Shijiazhuang
Lead Time:
Plla Injection Fillers are temporary, lasting up to two years, depending on the patient. Most patients require maintenance treatments to achieve the best results.
1.Safe
The chance of nodules by Plla Injection Filler is much lower.
Greatly reduce the risk of treatment.
2.Quality
Rice-type microspheres have uniform particles with a diameter of 3-5μm.
The best ingredient distribution ratio, higher stability, not easy to settle, no needle blocking.
 Irregular microspheres Diameter: 50 to 100μm |  Round microspheres Diameter: 10-80μm Need to use emulsifier and dispersant to prepare particles |  The golf icrospheres Diameter: 3-5μm The preparation process requires an aqueous phase |  Rice type microspheres Diameter: 3-5μm Preparation process "0" water phase, "0" emulsifier and "0" dispersant. Higher security. |
3.Fast effect
7.Comparison
Brand | Sculptra® | DevoluxTM |
Structure | Irregular particles | Rice type microspheres |
Technique | Unkown | SFE |
Total weight per vial | 367.5mg | 287mg |
PLLA weight per vial | 150mg | 160mg |
Particle size | 40-60um | 3-5um |
Mixing volume | 6 | 10 |
Mixing time | 48h | 5min |
Pain | Painful | Light pain |
Forehead
Volume: 5-8ml
Injection level: blunt needles, flatly, mainly subcutaneously, supplemented by periosteum.
Remarks: If the amount is too large, the water will flow down.
Temple
Volume: 2-3ml on one side
Injection level: blunt and sharp needles are used together. The levels are subcutaneous fat layer and temporal muscle layer.
Remarks: Withdraw the needle and press until the medicine is evenly dispersed, then use a blunt needle to spread Plla Injection Filler at the subcutaneous fat evenly, and press evenly.
Cheekbone
Volume: 2ml on one side
Injection level: It is recommended to use blunt needles flatly in multiple layers, subcutaneous, fat layer, fascia layer, subfascial tissue and periosteum.
Tear through
Volume: 1ml on one side
Injection level: It is recommended to use sharp needles, for single point injection at subcutaneous and fat layer.
Stretch marks
Mixing ratio: Add 15ml sterile water and 2ml Lidocaine.
Volume: 20ml-30ml Injection level: At the obvious part of the fractured layer. The sharp needle is inserted vertically into the deep dermis.
Remarks: Do not inject at the fat layer.
1.Exported carton package,each in bubble bag with carton dividers.
2.Special package is available refering to your requirements.
Delivery Time: DHL: 4-7 days
Dermax,with a comprehensive product portfolio is a leading innovator of advanced aesthetic medical technologies.
The Company's technology enables physicians to provide excellent soluntions for a broad range of medical- aesthetic application including face and body reshaping, resurfacing skin, eliminating fine lines or wrinkles treating scars, or removing unwanted hair.we've built in the easy of use, versatility,intuitiveness and value that allow physicians to do what they do best. The company is always looking forward to developing new solutions,products and industry-leading services designed around the needs of our partner physicians. So that can deliver better results,faster and safer than ever before.
Before & After
|
Q: What is the MOQ?
A: We welcome small quantity for testing. MOQ is only 1 package!
Q: Can I mix different models?
A: Sure!
Q: Can I add or delete items from my order if I change my mind?
A: Yes!
Q: Can I put my own logo (OEM)?
A: Yes!
Q: When you ship my order?
A: Normally 2 days after receiving your payment, but it can be negotiated based on order quantity. Hope you could understand!
Q: How can you guarantee the production quality?
A: We have 13-year experience. We have strictly quality control system in our production process. We have 4 times inspection for each finished product before package.
Q: Which areas are most effectively treated with PDO threads?
A:Face, neck, eyebrows, nasolabial folds, marionette lines, cheeks, jaw line and double chins, as well as body areas in thin patients.
Q: What to do if a thread becomes visible through the skin on the neck?
A:Neck skin is very delicate and highly translucent; the blue colour of the thread will not last and will dissolve in the skin after about two weeks. So one should wait.
Injectable poly-l-lactic acid (Plla Injection Filler) is known commercially as Sculptra and Sculptra Aesthetic. The FDA has approved Sculptra since 2004 to treat lipoatrophy (thinning of the fat pads on the face) associated with the HIV virus. Sculptra Aesthetic received its FDA approval in 2009 for improving the appearance of nasolabial folds contour changes and other facial wrinkles.
As we age, the fat, muscles, bone, and skin in our face begins to thin. This loss of volume leads to either a sunken or sagging appearance of the face. Injectable poly-l-lactic acid is used to create structure, framework, and volume to the face. Plla Injection Filler is known as a bio-stimulatory dermal filler, this means it stimulates your own skin to produce new collagen. Over time your skin breaks down PLLA into water and carbon dioxide. The effects of Plla Injection Filler appear gradually over a few months, producing natural results.
Instructions:
| Name | Plla Injection Filler |
| Specification | 160mg/Vial |
| Injection layer | Between subdermal and superficial fat |
| Session | 3 times treatment is a session. The second treatment is 1-1.5 months after the first treatment. The third treatment is 1.5-2 months after the second treatment. |
| Duration | A session lasts for 2-3 years |
| Expiry time | 2 years |
| Storage | Room temperature storage |
| Quantity(Pieces) | 1 - 20 | 21 - 100 | >100 |
| Est. Time(days) | 3 | 7 | to be negotiated |
Topical numbing agents or anesthetic injections are sometimes applied to ease discomfort. Also, lidocaine is commonly added to Plla Injection Filler for improved patient comfort. Before and following treatment, ice may be given to ease discomfort and swelling. Patients are encourage to massage the treatment areas for the first 5 days, 5 times a day, for 5 minutes each. We call this the 5-5-5 rule.
Packing&Deliver
Packing Details sterile packaging and aluminum packing
Port Shijiazhuang
Lead Time:
Plla Injection Fillers are temporary, lasting up to two years, depending on the patient. Most patients require maintenance treatments to achieve the best results.
1.Safe
The chance of nodules by Plla Injection Filler is much lower.
Greatly reduce the risk of treatment.
2.Quality
Rice-type microspheres have uniform particles with a diameter of 3-5μm.
The best ingredient distribution ratio, higher stability, not easy to settle, no needle blocking.
Irregular microspheres Diameter: 50 to 100μm | Round microspheres Diameter: 10-80μm Need to use emulsifier and dispersant to prepare particles | The golf icrospheres Diameter: 3-5μm The preparation process requires an aqueous phase | Rice type microspheres Diameter: 3-5μm Preparation process "0" water phase, "0" emulsifier and "0" dispersant. Higher security. |
3.Fast effect
7.Comparison
Brand | Sculptra® | DevoluxTM |
Structure | Irregular particles | Rice type microspheres |
Technique | Unkown | SFE |
Total weight per vial | 367.5mg | 287mg |
PLLA weight per vial | 150mg | 160mg |
Particle size | 40-60um | 3-5um |
Mixing volume | 6 | 10 |
Mixing time | 48h | 5min |
Pain | Painful | Light pain |
Forehead
Volume: 5-8ml
Injection level: blunt needles, flatly, mainly subcutaneously, supplemented by periosteum.
Remarks: If the amount is too large, the water will flow down.
Temple
Volume: 2-3ml on one side
Injection level: blunt and sharp needles are used together. The levels are subcutaneous fat layer and temporal muscle layer.
Remarks: Withdraw the needle and press until the medicine is evenly dispersed, then use a blunt needle to spread Plla Injection Filler at the subcutaneous fat evenly, and press evenly.
Cheekbone
Volume: 2ml on one side
Injection level: It is recommended to use blunt needles flatly in multiple layers, subcutaneous, fat layer, fascia layer, subfascial tissue and periosteum.
Tear through
Volume: 1ml on one side
Injection level: It is recommended to use sharp needles, for single point injection at subcutaneous and fat layer.
Stretch marks
Mixing ratio: Add 15ml sterile water and 2ml Lidocaine.
Volume: 20ml-30ml Injection level: At the obvious part of the fractured layer. The sharp needle is inserted vertically into the deep dermis.
Remarks: Do not inject at the fat layer.
1.Exported carton package,each in bubble bag with carton dividers.
2.Special package is available refering to your requirements.
Delivery Time: DHL: 4-7 days
Dermax,with a comprehensive product portfolio is a leading innovator of advanced aesthetic medical technologies.
The Company's technology enables physicians to provide excellent soluntions for a broad range of medical- aesthetic application including face and body reshaping, resurfacing skin, eliminating fine lines or wrinkles treating scars, or removing unwanted hair.we've built in the easy of use, versatility,intuitiveness and value that allow physicians to do what they do best. The company is always looking forward to developing new solutions,products and industry-leading services designed around the needs of our partner physicians. So that can deliver better results,faster and safer than ever before.
Before & After
|
Q: What is the MOQ?
A: We welcome small quantity for testing. MOQ is only 1 package!
Q: Can I mix different models?
A: Sure!
Q: Can I add or delete items from my order if I change my mind?
A: Yes!
Q: Can I put my own logo (OEM)?
A: Yes!
Q: When you ship my order?
A: Normally 2 days after receiving your payment, but it can be negotiated based on order quantity. Hope you could understand!
Q: How can you guarantee the production quality?
A: We have 13-year experience. We have strictly quality control system in our production process. We have 4 times inspection for each finished product before package.
Q: Which areas are most effectively treated with PDO threads?
A:Face, neck, eyebrows, nasolabial folds, marionette lines, cheeks, jaw line and double chins, as well as body areas in thin patients.
Q: What to do if a thread becomes visible through the skin on the neck?
A:Neck skin is very delicate and highly translucent; the blue colour of the thread will not last and will dissolve in the skin after about two weeks. So one should wait.
